Add: Shanghai city Minhang District Chunshen Road 3799 Lane100Lane 10,601 rooms
P.C.:201100
ATTEN: Mr. extension ( General Manager)
Mobile:13651828968
Tel:021-34976576
      021-67651289
FAX:021-64609136really
E-mail: xrkjchem@hotmail.com

Water-Based Printing Crosslinker

 
产品编号:
189
产品名称:
Water-Based Printing Crosslinker
产品类别:
XR-100 series
 
   产 品 说 明
Water-Based Printing Crosslinker (XR-102)
[Overview]
With the development of water-based technique of the printing material, higher requirements on the wash durability, surface anti-adhesion and fastness have been put forward, so our company has developed the XR-102 specially. Cross-linking reaction can occur between this product and the hydrophilic group in the printing material, with the original linear structure of this product changed to network three-dimensional structure through cross-linking, thus greatly improving the wash durability, fastness and anti-adhesion and other performances of the printing coating.
 [Typical Characteristics]
Type: Polyfunctional aziridine crosslinker
Appearance: colorless or pale yellow liquid
Solid content (%):   >99             CAS:        64265-57-2
Viscosity (25℃) mPa·s: 180~200     Density (20℃):       1.08
Freezing point (℃): about -15             Boiling point (℃) :   >200
Flash point    (℃) : >100             PH value (25℃):   8~10.5
Working life (H):    48                        Stability (25℃·month):  12
Solubility: soluble in water, alcohols, ketones and esters  
Water resistance (25℃·%): >100
[Product Application]
The coating can have good washing fastness, flocking fastness and isolation effect through adding 1~3%XR-102 into the jean paste, water-based flocking paste and isolation paste additive.
▲The coating can have good anti-adhesion and shaping effect through adding 0.3%-0.5% XR-102 into the general paste and artificial silk and flower paste.
▲The water resistance of the coating can be improved significantly through adding 0.5% XR-102 into the waterproof nylon paste.
▲The water resistance of the coating can be improved significantly through adding XR-102 into the water-based ink.
▲ The water resistance and anti-adhesion effect of the coating can be improved significantly through adding certain amount of XR-102 into the anti-overheating paste at room temperature.
 [Safety and Toxicity]
l        Only applicable for industrial production.
l        Industrial producers should wear special-purpose mask or operate at the upwind place.  
l        Anyone who feels uncomfortable should drink some milk or baking soda water and who have serious symptoms should seek medical advice.
l        Avoid contacting with skin and eyes. Wash skin with clean water immediately once this product contacts with skin.
[Storage and Package]
□ 5kg plastic barrel and 25kg plastic-lined barrel
□ This product should be kept under a dark, dry and ventilated environment and at room temperature.
□ Once the barrel containing this product is opened, please seal the barrel as soon as possible so as to avoid contacting with air which will cause gelling.
[Special Note]
This product belongs to the crosslinker for external use. Once the paste is mixed well it should be used within 12 hours. The PH value of the paste shall be not less than 7, or there will be too fast cross-linking phenomenon. Our company is only responsible for the samples as well as products due to different operations of the technicians, so the customer is advised to do a small test before mass production.
 
点击数:1617  录入时间:2012-5-9 【打印此页】 【关闭