Add: Shanghai city Minhang District Chunshen Road 3799 Lane100Lane 10,601 rooms
P.C.:201100
ATTEN: Mr. extension ( General Manager)
Mobile:13651828968
Tel:021-34976576
      021-67651289
FAX:021-64609136really
E-mail: xrkjchem@hotmail.com

Water-Based Shoe Material Glue Curing 

 
产品编号:
188
产品名称:
Water-Based Shoe Material Glue Curing 
产品类别:
XR-100 series
 
   产 品 说 明
 Water-Based Shoe Material Glue Curing Agent (XR-103)
[Overview]
With people paying more and more attention to the environmental protection, water-based shoe material glue has become the general trend, so our company has specially developed the water-based PA and PU shoe material curing agent (XR-103) according to customer's demand. The use of this product combining with the water-based PA, PU and other shoe material glues containing coating carboxyl group can greatly improve the water resistance of the shoe material glue, the adhesion strength of the glue, etc.
 [Typical Characteristics]
Appearance: colorless or pale yellow liquid
Solid content (%):  >99         
Viscosity (25℃) mPa·s: 180~200               
Boiling point (℃) :  >200  
PH value (25℃): 8~10.5 
Stability (25℃·month):  24
Water resistance (25℃· %): >100
[Application Method]
1.                  This product belongs to post-addition type curing agent, so it can only be added when using the glue.
2.                  The PH value of the glue shall be not less than 7, or the film formation effect will be affected due to too fast cross-linking.
3.                  Additive amount (adjust according to 1 ~ 3% of the solid content of the PA and PU).
4.                  If the viscosity of the adhesive is too large, it is best to use 1:1 clean water to dilute it before use. After that, add this product while mixing in order to get the best results.
5.                  It is best to use up the glue into which the curing agent is added in the same day, or there will be gelling phenomenon.
[Safety and Toxicity]
l            Only applicable for industrial production
l            Industrial producers should wear special-purpose mask or operate at the upwind place.
l            Anyone who feels uncomfortable should drink some milk or baking soda water and who have serious symptoms should seek medical advice.
l            Avoid contacting with skin and eyes. Wash your skin with clean water immediately once this product contacts with your skin.
[Storage and Package]
□ 5kg plastic barrel and 25kg plastic-lined barrel
□ This product should be kept under a dark, dry and ventilated environment and at room temperature.
□ Once the barrel containing this product is opened, please seal the barrel as soon as possible so as to avoid contacting with air which will cause gelling.
[Special Note]
Our company is only responsible for the samples as well as products due to different operations of the technicians, so the customer is advised to do a small test before mass production.
点击数:1479  录入时间:2012-5-9 【打印此页】 【关闭