Add: Shanghai city Minhang District Chunshen Road 3799 Lane100Lane 10,601 rooms
P.C.:201100
ATTEN: Mr. extension ( General Manager)
Mobile:13651828968
Tel:021-34976576
      021-67651289
FAX:021-64609136really
E-mail: xrkjchem@hotmail.com

Fabric Coating Curing Agent

 
产品编号:
186
产品名称:
Fabric Coating Curing Agent
产品类别:
XR-100 series
 
   产 品 说 明
Fabric Coating Curing Agent (XR-105)
[Overview]
With the consumer's growing demand on high-grade and environmental protection of the fabric coating, our company has specially developed the XR-105. Cross-linking reaction can occur between this product and the PA, PU and other hydrophilic group containing carboxyl system to form network three-dimensional structure, thus greatly improving the wash durability, dry and wet rubbing fastness, surface anti-adhesion and other performances of the coating.
[Typical Characteristics]
   Appearance: colorless or pale yellow clear liquid  
   Solid content (%):        >99
   PH value (25℃):       8 ~10.5
   Water resistance (25℃·%):     >100
   Viscosity (25℃) mPa·s:   180~200
[Product Application]
◇The use of this product combining with the water-based PA and PU jean coating adhesive can achieve good fastness to washing, surface anti-adhesion, etc.
◇Application of this product on the non-woven fabric coating can improve the water resistance and fastness of the coating.
[Application Method]
1.                  This product belongs to post-addition type additive, so it can only be added when using.
2.                  The PH value of the adhesive shall be not less than 7, or the film formation effect will be affected due to too fast cross-linking.
3.                  Additive amount (adjust according to 1 ~ 3% of the solid content of the adhesive).
4.                  If the viscosity of the adhesive is too large, it is best to use 1:1 clean water to dilute it before use. After that, add this product while mixing in order to get the best results.
5.                  It is best to use up the adhesive into which the additive is added in the same day, or there will be gelling phenomenon.
[Safety and Toxicology]
l        Only applicable for industrial production
l        Avoid contacting with skin and eyes. Wash skin with clean water or soap water immediately once this product contacts with skin.
l        Industrial producers should wear special-purpose mask or operate at the upwind place.  
l        Anyone who feels uncomfortable should drink some milk or baking soda water and who have serious symptoms should seek medical advice.
 
[Storage and Package]
This product should be kept under a dark, dry, moisture-proof and ventilated
点击数:1468  录入时间:2012-5-9 【打印此页】 【关闭